1.5kw ER11 Air Cooled Spindle Motor VFD Spindle Bracket

About 1.5kw ER11 Air Cooled Spindle Motor VFD Spindle Bracket

Basic parameters of 1.5kw Air cooled Spindle: Size: 65x 204mm(Body diameter: 65mm; Length: 204mm)Speed Ways: Through 3-phase output inverter and adjust the inverter frequency to change the spindle speed.Cooling: Air coolingPower Interface: Optional H17-4 pinswaterproof air plug. Theair plug marked 1234, 123 were connected to inverter(U, V, W), 4 connected inverter ground.(Pay attention our spindle 4 connecting to GND, promised personal safety)Power: 1.5kw(1HP=0.735kw)Voltage: 220vAC(If you need 110v/380v spindle, please leave message to us, thank you)Current: 6AFrequency: 0-400HzSpeed: 0-24000rpmRunout Off: 0.01mmBearing Type: 2X7002C P4 DT and 2X7002C P4 DTFull sealed angular contact bearingsCollet: ER11Clip Knife diameter: 7mm,6.35mm,6mm,5mm,4mm,3.175mm,3mm,2mm,1mmAir Cooling ER11collet chunkGrease LubricationMain Application of 1.5kw Air cooled Spindle: Engrave for wood, bamboo, normal PCB, PVC, PMMA, plastic, duotone board(ABS)and etc non-metal, also can engrave on gold, silver, copper, aluminium, Pb etc soft metal surface working.